DC MOTOR PUMP GROUP one
Basic Description
Consisting of the hefty duty DC motor as well as the CB1S gear pump, this pump motor group is definitely an excellent hydraulic electrical power unit for mobile hydraulic equipments, such as automobile carriers, mobile aerial lifts, and backup programs.
DC MOTOR PUMP GROUP two
Basic Description
This motor pump consists of four.5″ DC motor, a CBSR gear pump with built-in relief valve and examine valve.
DC MOTOR PUMP GROUP 3
General Description
This motor pump includes a 4.5″ DC motor in addition to a CBSR gear pump which has a standard electrical power up/gravity down circuit which has a relief valve, a check out valve plus a solenoid release valve.
Particular Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean the many hydraulic parts concerned in advance of mounting the power unit.
three. Viscosity of your hydraulic oil shoud be 15~68 cst, which need to also be clean and cost-free of impurities. N46 hydraulic oil is advised.
four. The electrical power unit ought to be mounted horizontally.
five. The relief valve pressure is preset about 25% higher than the operating strain.
six. Flow control valve for lowing speed adjustment is accessible unpon request.