Any injury to the teeth surfaces of a sprocket diminishes the existence with the conveyor chain.
With conventional sprockets, considerably worn sprocket teeth have been repaired by teeth padding or even the whole sprocket was replaced. In either situation, repair was pricey and with teeth padding, accuracy was impaired. We formulated new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our consumers to the dramatic savings in expense and time.
Framework
The teeth is often replaced by two methods: personal tooth replacement or sectional teeth substitute.
The bolts and nuts utilized for 
mounting the teeth on towards the sprocket are spot-welded to prevent loosening.
The respective structures are illustrated within the suitable.
The above photo and also the best ideal illustration demonstrate a sprocket for individual tooth replacement. Because the joint face among the replaced teeth along with the sprocket is formed inside a unique arc, the bonding accuracy is substantial as well as sprocket power is enhanced. Furthermore, because the load acting over the mounting bolts is decreased, there is less probability of loosening. This sprocket development is patented.
There are two styles of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are made use of for substantial sprockets getting hefty loads and welded sheet steel hubs for other applications.
DK Detachable Teeth Sprockets
Tags