Energy UNITS FOR LIFT TABLE

Electrical power UNITS FOR LIFT TABLE 1
Common Description
This energy unit is built solely for the tiny lift table,Consisting of high pressure gear pump, AC motor, multi-functional manifold, valves, tank, and so on. This electrical power unit is widely used in the industry of logistic devices which include minifork lift, scissors lift and ariel functioning platforms. The lower-ing motion is controlled through the solenoid valve with all the velocity controlled by the adjustable needle valve.
Electrical power UNITS FOR LIFT TABLE 2
Standard Description
This energy unit is developed exclusively for that medium lift table, Consisting of very effecient gear pump, AC motor, multifunctional manifold, valves, tank, ect. The lowering movement is actived by the solenoid valve as well as the speed controlled through the adjustable needle valve. Once the lift rises to a high positoin, however the electrical power supply is lower, the lowering motion is managed from the manual override function.
Electrical power UNITS FOR LIFT TABLE 3
Common Description
This electrical power unit is designed solely to the massive lift table, Consisting of really effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The decreasing movement is actived from the solenoid valve along with the velocity controlled by a strain compensated movement management valve.
Power UNITS FOR LIFT TABLE four
Standard Description
This electrical power unit is made exclusively for your huge lift table, Consisting of very effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The reducing movement is actived by the solenoid valve and also the velocity controlled through the adjustable needle valve. When the lift rises to a higher positoin, but the energy supply is minimize, the lowering motion is managed by the manual override perform.
Unique Notes
1. This energy unit is of S3 duty cycle, which could only function intermittently and repeatedly, i.e. 1 minute on and 9 minutes off.
2. Clean the many hydraulic elements concerned in advance of set up of the energy unit.
3. Viscosity in the oil shoud be 15~46 cst,which should also be clean and totally free of impurities.N46 hydraulic oil is encouraged.
4. Oil modifying is required soon after the first 100 operation hours,afterwards the moment every single 3000 hrs.
five. The power unit proven is built to be mounted vertically.