O-Ring Chain (LD)/X-Ring Chain (LX)

Highest wear resistance readily available by sealing grease among pins and bushings
The durability of chain is radically enhanced because grease is sealed concerning the pins and bushings by O-rings. The O-ring chain could be the most dependable model from the Greatest Daily life Chain Series with its great dress in resistance even within the situations or environments the place chain maintenance is hard.
Recommended makes use of.
?Conditions where regular chain substitute is needed due to wear stretch
?Situations exactly where lubrication throughout the services is not possible
?In an setting with much soil, sand, dust, etc.
?Applications that need strength larger than that of a sintered bushing roller chain
Other capabilities
?Decreasing noise. (The noise degree is 3 dB reduce in contrast to conventional roller chains.)
?Minimizing vibration using the friction created by O-Ring. (The power loss due to the friction is nearly negligible, because the frictional force concerning the pins and bushings is for normally in the applications.)
Variety of chains
The strength of an O-ring chain is almost exactly the same as that of a common roller chain. (Since the pins are longer than individuals of normal roller chain, the average rupture strength is slightly reduce.)
For selecting a suitable chain, refer to “Selection of Chains” .
Once the service ambient temperature is greater than 80° C, special heat resistant O-rings need to be utilized. In this instance, get hold of us for much more information and facts.
Connecting links and offset back links
Two sorts of connecting hyperlinks are available: clearance fit and interference fit. When higher strength or sturdiness is required, use interference-fit connecting website link. Only 2POJ is obtainable since the offset website link for all sizes.
Sprockets
O-ring chain uses longer pins than a normal roller chain. When working with multiplex O-ring chain, the typical sprocket for multiplex chains can’t be used.
Caution
O-ring chain is not advisable in applications wherever solvents or other substances might assault “Nitric Rubber”. Special materials O-rings may also be accessible for these problems: Please seek advice from us for specifics. Normally, “Nitric Rubber” is damaged by contact using the following chemical products.