DUMP TRAILER Power UNIT-DOUBLE ACTING
This electrical power unit has a power up power down circuit with load holding on both A & B ports. A stress compensatred movement control may be additional to circuit to control the decent velocity of the cylinder.
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean each of the hydraulic parts concerned ahead of set up of the electrical power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities. N46 hydraulic oil is advised.
4. The energy unit really should be mounted horizontally.
five. Check the oil degree in the tank right after the preliminary working on the energy unit.
6. Oil modifying is needed just after the initial one hundred operation hrs, afterwards when each 3000 hrs.
DUMP TRAILER Power UNIT- SINGLE ACTING
This electrical power unit features a electrical power up gravity down circuit. Commence the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve might be presented if essential. Also a pressure compen sated movement manage is often added to the circuit to control the descent speed on the cylinder.
Remark: Please talk to our revenue engineer for the various pump displacement, motor electrical power or tank capability.
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic components concerned in advance of installation of the power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which need to also be clean and absolutely free of impurities.N46 hydraulic oil is proposed.
4. The electrical power unit must be mounted horizontally.
five. Check the oil level in the tank just after the preliminary working on the power unit.
six. Oil transforming is required just after the original 100 operation hours, afterwards the moment every 3000 hrs.