China supplier CHINAMFG Lmd Type CHINAMFG Middle Small Power Transmission Single Flange Flexible Jaw Couplings flange coupling

Product Description

LMD Single Flange Type Plum Elastic Coupling(GB/T 5272-2002)

Product Description

 

♦Description
Plum elastic coupling has the characteristics of vibration reduction, buffering, small radial size, no lubrication, and easy maintenance. Suitable for starting frequency, positive and negative rotation, medium and low speed, medium and small power transmission.Not suitable for heavy loads and frequent replacement of elastic elements.

The structure of plum elastic coupling is simple. But when the elastic element is replaced, the half coupling shall be moved axially.LMS type easily replaces the elastic element without having to move the half coupling.

♦Basic Parameter and Main Dimension

Type	Norminal torque(Tn/N·m)		Speed(Np)		Shaft hole diameter (d1,d2,dz)	Length of the shaft hole			LO			D	D1	Type of elastic parts	Mass			Rotary inertia
	The hardness of elastic parts		LM	LMD, LMS		Y type	J1,Z type	L (recommend)	LM	LMD	LMS		LMD, LMS		LM	LMD	LMS			LM	LMD	LMS
	a/HA	b/HD				L
	80+5	60+5	r·min-1		Mm										kg				kg·m2
LM1 LMD1 LMS1	25	45	15300	8500	12,14	32	27	35	86	92	98	50	90	MT1-a  -b	0.66	1.21	1.33			0.0002	0.0008	0.0013
					16,18,19	42	30
					20,22,24	52	38
					25	62	44
LM2 LMD2 LMS2	50	100	1200	7600	16,18,19	42	30	38	95	101.5	108	60	100	MT2-a  -b	0.93	1.65	1.74			0.0004	0.0014	0.0571
					20,22,24	52	38
					25,28	62	44
					30	82	60
LM3 LMD3 LMS3	100	200	10900	6900	20,22,24	52	38	40	103	110	117	70	110	MT3-a  -b	1.41	2.36	2.33			0.0009	0.0571	0.0034
					25,28	62	44
					30,32	82	60
LM4 LMD4 LMS4	140	280	9000	6200	22,24	52	38	45	114	122	130	85	125	MT4-a  -b	2.18	3.56	3.38			0.002	0.005	0.0064
					25,28	62	44
					30,32,35,38	82	60
					40	112	84
LM5 LMD5 LMS5	350	400	7300	5000	25,28	62	44	50	127	138.5	150	105	150	MT5-a  -b	3.60	6.36	6.07			0.005	0.0135	0.0175
					30,32,35,38	82	60
					40,42,45	112	84
LM6 LMD6 LMS6	400	710	6100	4100	30,32,35,38	82	60	55	143	155	167	185	185	MT6-a  -b	6.07	10.77	10.47			0.0114	0.0329	0.0444
					40,42,45,48	112	84
LM7 LMD7 LMS7	630	1120	5300	3700	35*,38*	82	60	60	159	172	185	205	205	MT7-a  -b	9.09	15.30	14.22			0.5712	0.0581	0.571
					40*,42*,45,48,50,55	112	84
LM8 LMD8 LMS8	1120	2240	4500	3100	45*,48*,50,55,56	112	84	70	181	195	209	170	240	MT8-a  -b	13.56	22.72	21.16			0. 0571	0.1175	0.1493
					60,63,65	142	107
LM9 LMD9 LMS9	1800	3550	3800	2800	50*,55*,56*	112	84	80	208	224	240	200	270	MT9-a  -b	21.40	34.44	30.70			0.1041	0.2333	0.2767
					60,63,65,70,71,75	142	107
					80	172	132
LM10 LMD10 LMS10	2800	5600	3300	2500	60*,63*,65*,70,71,75	142	107	90	230	248	268	230	305	MT10-a  -b	32.03	51.36	44.55			0.2105	0.4594		0.5262
					80,85,90,95	172	132
					100	212	167
LM11 LMD11 LMS11	4500	9000	2900	2200	71*,71*,75*	142	107	100	260	284	308	260	350	MT11-a  -b	49.52	81.30	70.72			0.4338	0.9777		1.1362
					80*,85*,90,95	172	132
					100,110,120	212	167
LM12 LMD12 LMS12	6300	12500	2500	1900	80*,85*,90*95	172	132	115	297	321	345	300	400	MT12-a  -b	73.45	115.53	99.54			0.8205	1.751		1.9998
					100,110,120,125	212	167
					130,140,150	252	202
LM13 LMD13 LMS13	11200	2000	2100	1600	90*,95*	172	132	125	323	348	373	360	460	MT13-a  -b	103.86	161.79	137.53			1.6718	3.667		3.6719
					100*,110*,120*,125*	212	167
					130,140,150	252	202
LM14 LMD14 LMS14	12500	25000	1900	1500	100*,110*,120*,125*	212	167	135	333	358	383	400	500	MT14-a  -b	127.59	196.32	165.25			2.499	4.8669		5.1581
					130*,140*,150	252	202
					160	302	242

NOTE:
1. Mass and rotary inertia are the approximation calculated according to the recommended minimum axial hole.
2. Diameter of shaft hole with * can be used for Z – type shaft hole.
3. a.b is the code for 2 different materials and the hardness of elastic parts. 

Other products

 

Transmission Machinery  Parts Name	Model
Universal Coupling	WS,WSD,WSP
Cardan Shaft	SWC,SWP,SWZ
Tooth Coupling	CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK
Disc Coupling	JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling	LM
Chain Coupling	GL
Jaw Coupling	LT
Grid Coupling	JS

 

 

Company Profile

 

HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 26 employees in our company, including 2 senior engineers and no fewer than 10 mechanical design and manufacture, heat treatment, welding, and other professionals.

Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.

Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. 

Our service

 

1. Design Services
Our design team has experience in Cardan shafts relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2. Product Services
Raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→ Packing→ Shipping

3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4. Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5. Quality Control
Every step should be a special test by Professional Staff according to the standard of ISO9001 and TS16949.
 

FAQ

 

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of couplings.

Q 2: Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks in PDF or AI format.

Q 3: How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have a very good price principle, when you make the bulk order the cost of the sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 6: What is the MOQ?
A: Usually our MOQ is 1 pcs.

Q 7: Do you have inspection procedures for coupling?
A: 100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 9: What’s your payment?
A: T/T.  
 

♦Contact Us

Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Differences Between Rigid and Flexible Flange Coupling Designs

Flange couplings are essential components used in various mechanical systems to connect shafts and transmit power between them. Two common types of flange coupling designs are rigid flange couplings and flexible flange couplings. These designs differ in their construction and performance characteristics:

Rigid Flange Couplings:

Rigid flange couplings are designed to provide a solid and inflexible connection between two shafts. They are suitable for applications where shaft alignment is precise, and no misalignment is expected during operation. The key features of rigid flange couplings include:

• Stiff Construction: Rigid flange couplings are made from robust materials such as steel or aluminum. Their stiffness ensures that there is little to no flexibility, maintaining a solid connection between the shafts.
• No Misalignment Compensation: Rigid flange couplings do not accommodate any misalignment between the shafts. Therefore, proper alignment is crucial during installation to prevent undue stress on the shafts and connected equipment.
• High Torque Transmission: Due to their rigid design, rigid flange couplings offer high torque transmission capabilities, making them suitable for heavy-duty applications with precise alignment requirements.

Flexible Flange Couplings:

Flexible flange couplings, as the name suggests, offer some degree of flexibility and misalignment compensation between the connected shafts. They are used in applications where shaft misalignment, caused by factors like vibration, temperature changes, or minor installation errors, is likely to occur. The key features of flexible flange couplings include:

• Misalignment Compensation: Flexible flange couplings can tolerate angular, parallel, and axial misalignment to some extent. This helps to reduce stress on the connected equipment and enhances the overall performance and lifespan of the system.
• Vibration Dampening: The flexibility of these couplings allows them to dampen vibrations and shocks, making them suitable for systems where vibrations are a concern.
• Reduced Stress on Bearings: Flexible flange couplings can help reduce the stress on bearings and other connected components by absorbing misalignment forces.

When choosing between rigid and flexible flange couplings, it is essential to consider the specific requirements of the application. Rigid flange couplings are best suited for applications with precise alignment, while flexible flange couplings are ideal for systems where some degree of misalignment is expected. The selection process should also take into account factors such as torque capacity, shaft sizes, operating conditions, and maintenance requirements.

In conclusion, the choice between rigid and flexible flange coupling designs depends on the application’s alignment needs and the desired level of misalignment compensation and vibration dampening.

What are the Temperature and Environmental Limitations of Flange Couplings?

Flange couplings, like any mechanical component, have certain temperature and environmental limitations that can impact their performance and lifespan. It’s crucial to understand these limitations to select the appropriate flange coupling for specific applications. Here are the key factors to consider:

1. Temperature: Flange couplings are typically manufactured from materials that can withstand a range of temperatures. The maximum and minimum operating temperatures will depend on the material composition of the coupling. Common materials used for flange couplings, such as steel or stainless steel, can handle a broad temperature range from -40°C to 300°C or higher. However, extreme temperatures beyond the recommended range can cause material degradation, loss of strength, and potential failure of the coupling. In high-temperature applications, specialized materials like heat-resistant alloys may be used to maintain coupling integrity.

2. Corrosive Environments: Flange couplings operating in corrosive environments, such as chemical processing plants or marine applications, should be made from materials that resist corrosion. Stainless steel or other corrosion-resistant alloys are commonly used for such conditions. Regular inspection and maintenance are crucial to monitor the coupling’s condition and protect against premature failure due to corrosion.

3. Hazardous Environments: In certain industries, flange couplings may be exposed to hazardous or explosive atmospheres. In such cases, it’s essential to choose flange couplings that meet relevant safety standards, such as ATEX or IECEx, and are specifically designed and certified for use in hazardous environments.

4. Cleanliness and Hygienic Requirements: Industries such as food processing, pharmaceuticals, and biotechnology have strict hygiene standards. Flange couplings used in these applications should be easy to clean and constructed from materials that meet sanitary requirements to prevent contamination and ensure product purity.

5. Environmental Factors: Flange couplings used in outdoor applications may be exposed to various environmental factors such as moisture, dust, and UV radiation. Choosing couplings with appropriate protective coatings or seals can help enhance their resistance to environmental elements and extend their service life.

Before selecting a flange coupling for a specific application, it’s essential to consider the temperature and environmental conditions it will be exposed to. Consulting with coupling manufacturers or engineers can help ensure that the chosen flange coupling is suitable for the intended operating environment and will deliver reliable performance over its expected lifespan.

How Does a Flange Coupling Protect Connected Equipment from Shock Loads and Vibrations?

A flange coupling plays a crucial role in protecting connected equipment from shock loads and vibrations by absorbing and dampening the impact and oscillations. The design and material properties of flange couplings contribute to their ability to mitigate shock and vibrations effectively. Below are the key factors explaining how flange couplings provide protection:

1. Flexibility: Flexible flange couplings are designed with elastomeric or metallic elements that offer flexibility between the connected shafts. When subjected to shock loads or vibrations, these elements can absorb and dissipate the energy, preventing it from transmitting to the connected equipment. The flexibility allows the coupling to accommodate misalignment and minor shocks, reducing the stress on the system.

2. Damping Properties: Elastomeric elements used in certain flange coupling designs possess inherent damping properties. These materials can absorb and dissipate vibrational energy, reducing resonance and preventing harmful vibrations from being amplified in the system.

3. Misalignment Compensation: Flange couplings with flexible elements can compensate for certain degrees of misalignment between the shafts. Misalignment can lead to additional forces and vibrations in the system, but the coupling’s ability to accommodate this misalignment reduces the impact on the connected equipment.

4. Resilience: Flange couplings made from materials like steel or other alloys have high resilience and can withstand sudden shock loads without permanent deformation. This resilience helps maintain the coupling’s integrity and allows it to continue functioning effectively after exposure to shock events.

5. Friction Damping: Some rigid flange coupling designs incorporate friction damping features. These couplings rely on friction between the mating surfaces to dampen vibrations and prevent resonant frequencies from causing issues in the system.

6. Material Selection: The choice of materials for both flexible and rigid flange couplings is critical in their ability to protect connected equipment from shock loads and vibrations. High-quality materials with appropriate mechanical properties, such as strength and elasticity, enhance the coupling’s ability to withstand shocks and vibrations.

7. Proper Installation: Correct installation and alignment of the flange coupling are essential to ensure it functions as intended. Properly installed couplings can effectively manage shocks and vibrations, while misaligned couplings may experience premature wear and transmit higher forces to the connected equipment.

8. Maintenance: Regular maintenance, including inspection, lubrication, and monitoring, ensures that the flange coupling continues to provide protection against shocks and vibrations throughout its service life.

In summary, flange couplings protect connected equipment from shock loads and vibrations by providing flexibility, damping properties, misalignment compensation, resilience, and friction damping. The selection of suitable materials, proper installation, and regular maintenance further enhance their performance in protecting industrial machinery and equipment from potential damage caused by dynamic forces.

editor by CX 2024-04-11